Instructions / Assembly

ITEM
NO.
:
263
REVISED JUL 2, 2012
Printed in Vietnam
- 3 -
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO Description Qty Sketch NO Description Qty Sketch
1
Short bolt
(M6x40mm)
4
2
Long bolt
(M6x50mm)
2
3
Screw
(M4x30mm)
3
4
Flat Washer
(ɸ6.5x14mm)
4
5
Lock Washer
(ɸ6.5x11mm)
4
6
Curve Washer
(12x16mm)
2
7
Allen Key
(4mm)
1
STEP 1
Attach Side Aprons (C) to the Back (A) with Short bolts (1), and Washers (4) and (5). Tighten with the
Allen Key (7)
Note: DO NOT fully tighten any of the bolts, until the chair is assembled, then put on a flat level
surface to make sure the chair is level and then tighten the bolts.