ASSEMBLY INSTRUCTIONS Description Item No. : DELUXE VANITY TABLE : DT-2 ITEM NO.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free 888-944-8396.
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty 1 Bolt (M6X60mm) 3 Flat washer (6.5X19mm) NO Description Qty 8 2 Lock washer (6.5X11mm) 8 8 4 Allen key (4x80mm) 1 6 Knob 2 5 Screw (M4X35mm) 6 7 Pan head screw (M4X25mm) 2 Sketch ITEM NO.
STEP 1 Attach legs (B) to top (A) with bolts (1), and washers (2) and (3) as shown below. Tighten with allen key (4). Attach crossbars (C) and (D) between front and back legs with screws (5). Tighten with a screwdriver STEP 2 Attach knobs (6) to front of drawers with screws (7) as shown below. Tighten with a screwdriver. ITEM NO.
