ASSEMBLY INSTRUCTIONS Description : MEDIA CABINET RTA Item No. : CU-15 Printed in Vietnam ITEM NO.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free 888-944-8396.
PART LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: NO Description Qty A Crown C Sketch NO Description Qty 1 B Door 1 Side panel (R) 1 D Side panel (L) 1 E Bottom shelf 1 F Shelf 1 G Adjustable Shelf 4 H Rail 1 I Back panel 1 Sketch HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging.
STEP 1 Attach shelf (F) and bottom shelf (E) to left side panel (D) with bolts (1), and washers (2) and (3) as shown below. Tighten with Allen key (11). EP = STEP 2 Insert rail (H) into side panels (C) and (D) as shown below. Then attach shelves (E) and (F) (from step 1) to right side panel (C) with bolts (1), and washers (2) and (3) as shown below. Tighten with Allen key (11). Printed in Vietnam ITEM NO.
STEP 3 Attach rail (H) (from step 2) to crown (A) with screws (7) as shown below. Attach side panels (C) and (D) (from step 2) to crown (A) with bolts (1), and washers (2) and (3) as shown below. Tighten with Allen key (11). STEP 4 Slide back panel (I) into grooves of top (A), and side panels (C) and (D). Then attach back panel to the unit with pan head screws (5) as shown below. Tighten with a screwdriver. Printed in Vietnam ITEM NO.
STEP 5 Attach door (B) to the unit with screws (6) as shown below. Tighten with a screwdriver. STEP 6 Attach knob (8) to door (B) with pan head screw (9) as shown below. Tighten with a screwdriver. Attach brackets (4) to side panels (C) and (D) as shown below. Then place the adjustable shelves (G) on the brackets and attach with screws (6). Tighten with a screwdriver.
