Instructions / Assembly

ITEM NO.: 2027
REVISED AUG 29, 2014
Printed in Vietnam
- 3 -
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware in a large bag:
1/ CHAIR: totally same in 2 small bags, for 2 chairs
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Bolt
(M6x50mm)
6
2
Screw
(M4x35mm)
4
3
Barrel nut
( M6x13mm)
6
4
Allen key
(4x80mm)
1
2/ TABLE
:
in a small bag
NO Description Qty Sketch NO Description Qty Sketch
1
Bolt
(M6x50mm)
6
2
Screw
(M4x35mm)
6
3
Barrel nut
( M6x13mm)
6
4
Allen key
(4x80mm)
1
STEP1-chair
Attach stretchers (B), and crossbar (D) to the 1st side frame (A) with bolts (1) and nuts (3). Tighten with
Allen key (4) as shown below.
Note: DO NOT fully tighten any of the bolts, until the chair is assembled, then put on a flat level
surface to make sure the chair is level and then tighten the bolts.