Instructions / Assembly

ITEM
NO.
: C
-
271
REVISED JUL 6, 2012
Printed in Vietnam
- 3 -
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Q
ty
Sketch
NO
Description
Q
ty
Sketch
1
Short bolt
(M6x40mm)
3 2
Long bolt
(M6x80mm)
4
3
Medium bolt
(M6x60mm)
4 4
Screw
(M4x35mm)
10
5
Lock washer
(6.5x11mm)
11 6
Flat washer
(6.5x19mm)
11
7
Allen key
(4mm)
1
STEP 1
Attach seat frame (B) to the back (A) by using bolts (3) and (1), washers (5) and (6) tighten with allen
key (7) as shown below.
Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface to
make sure the chair is level and then tighten the bolts.