ASSEMBLY INSTRUCTIONS Description Item No. : BEDFORD LADDERBACK CHAIR : C-271 ITEM NO.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free 888-944-8396.
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty Sketch NO Short bolt 1 2 (M6x40mm) Sketch 4 (M6x80mm) Medium bolt Screw 4 4 10 (M4x35mm) (M6x60mm) Lock washer 5 Qty Long bolt 3 3 Description Flat washer 11 6 (6.5x11mm) 11 (6.
STEP 2 Attach front legs (C) to the seat frame.Use bolts (2), washers (5) and (6) and tighten with allen key (7). Place side stretchers (E) and front stretchers (D) between front and back legs, use the screw driver to tighten the screws (4) as shown below. STEP 3 Attach the seat (F) to top of the seat frame (from Step 2) by using screws (4) tighten with a screw driver. ITEM NO.
