Instructions / Assembly

ITEM
NO.
:
265
REVISED JUL 2, 2012
Printed in Vietnam
- 3 -
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO Description Qty Sketch NO Description Qty Sketch
1
Short bolt
(M6x40mm)
3 2
Medium bolt
(M6x60mm)
4
3
Long bolt
(M6x80mm)
4 4
Flat Washer
(6.5x19mm)
11
5
Short screw
(M3.5x15mm)
2 6
Long screw
(M4x35mm)
8
7
Allen Key
(4mm)
1 8
Lock Washer
(6.5x11mm)
11
STEP 1
Attach seat frame (B) to Back (A) by using bolts (3) and (1), and washers (4) and (8).
Note: DO NOT tighten any of the bolts, until the chair is fully assembled. Put the chair on a flat level
surface, make sure the chair is level and tighten with allen key (7) as shown below.