Instructions / Assembly

ITEM :
C
-
613
REVISED FEB 6, 2012
Printed in Vietnam
- 3 -
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO Description Qty Sketch NO Description Qty Sketch
1
Short bolt
(M6x40mm)
3 2
Medium bolt
(M6x60mm)
4
3
Long bolt
(M6x80mm)
4 4
Screw
(M4x35mm)
10
5
Flat washer
(6.5x19mm)
11 6
Lock washer
(6.5x11mm)
11
7
Allen key
(4mm)
1
STEP 1
Attach seat frame (B) to the back (A) with bolts (1) and (3), and washers (5) and (6) ,tighten with Allen
key (7) as shown below.
Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface to
make sure the chair is level and then tighten the bolts.