Instructions / Assembly

ITEM NO.: C
-
61
REVISED MAR 19, 2013
Printed in Vietnam
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Short bolt
(M6x40mm)
3 2
Medium bolt
(M6x60mm)
4
3
Long bolt
(M6x80mm)
4 4
Screw
(M4x35mm)
10
5
Lock washer
(6.5x11mm)
11 6
Flat washer
(6.5x19mm)
11
7
Allen key
(4x80mm)
1
STEP 1
Attach Seat Frame (B) to the Back (A) by using bolts (1) and (3), washers (5) and (6). Tighten with
allen key (7) as shown below.
Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface to
make sure the chair is level and then tighten the bolts.