Instructions / Assembly

ITEM NO. : C-310
REVISED APR 29, 2016
Printed in Vietnam
- 4 -
STEP 1
Attach the seat frame (B) to the back (A) with bolts (1) and (3), and washers (5) and (6) as shown
below. Tighten with Allen key (7).
Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface to
make sure the chair is level and then tighten the bolts.
STEP 2
Attach front legs (D) to the seat frame (B) with bolts (2), and washers (5) and (6) as shown below.
Tighten with Allen key (7).
Attach side stretchers (E) to front legs (D) and legs of the back (A) with screws (4) as shown below.
Tighten with a screwdriver.