Instructions / Assembly
ITEM
NO
: C
-
921
ISSUED JUN 26, 2014
Printed in Vietnam
- 3 -
HARDWARE LIST
When unpacking, please carefully not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO Description Qty Sketch NO Description Qty Sketch
1
Short bolt
( M6x40mm)
3
2
Medium bolt
(M6x60mm)
4
3
Long bolt
(M6 x 80mm)
4
4
Short Screw
(M4x35mm)
6
5
Lock Washer
(6.5 x11mm)
11
6
Flat Washer
(6.5 x19mm)
11
7
Allen Key
(4 x 80MM)
1
8
Long Screw
(M4 x 40mm)
4
STEP 1
Attach seat frame (B) to the back (A) by using bolts (3) and (1), washers (5) and (6). Tighten with Allen
key (7) as shown below.
Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface to
make sure the chair is level and then tighten the bolts.