Instructions / Assembly

ITEM : C
-
47
ISSUED NOV 04, 2014
Printed in Vietnam
- 3 -
HARDWARE LIST
When unpacking, please carefully not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Q
ty
Sketch
NO
Description
Q
ty
Sketch
1
Short bolt
( M6 x 40mm)
3 2
Medium bolt
(M6 x 60mm)
4
3
Long bolt
(M6 x 80mm)
4 4
Long Screw
(M4 x 35mm)
8
5
Lock Washer
(6.5 x 11mm)
11 6
Flat Washer
(6.5 x 19mm)
11
7
Screw
(M3.5 x 15)
2 8
Allen Key
(K4x80mm)
1
STEP 1
Attach seat frame (B) to the back (A) by using bolts (1) and (3), washers (5) and (6), as shown below.
Tighten with Allen key (8).
Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface to
make sure the chair is level and then tighten the bolts.