Instructions / Assembly

ITEM NO : C-36
ISSUED SEP 15, 2015
Printed in Vietnam
- 3 -
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Short bolt
( M6 x 40mm)
3
2
Medium bolt
(M6 x 60mm)
4
3
Long bolt
(M6 x 80mm)
4
4
Wood Screw
(M4 x 35mm)
8
5
Lock Washer
(6.5 x11mm)
11
6
Flat Washer
(6.5 x19mm)
11
7
Allen Key
(M4x80mm)
1
8
Wood Screw
(M3.5 x 15mm)
2
STEP 1
Attach seat frame (B) to the back (A) with bolts (1) and (3), and washers (5) and (6), as shown below.
Tighten with Allen key (7).
Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface to
make sure the chair is level and then tighten the bolts.