Instructions / Assembly
ITEM NO : C-34
ISSUED MAY 06, 2015
Printed in Vietnam
- 3 -
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO Description Qty Sketch NO Description Qty Sketch
1
Short bolt
( M6x40mm)
3
2
Medium bolt
(M6x60mm)
4
3
Long bolt
(M6 x 80mm)
4
4
Medium Screw
(M4 x 35mm)
8
5
Screw
(M3.5x15mm)
2
6
Lock Washer
(6.5 x11mm)
11
7
Flat Washer
(6.5 x19mm)
11
8
Allen Key
(M4x80mm)
1
STEP 1
Attach seat frame (B) to the back (A) with bolts (1) and (3), and washers (6) and (7), as shown below.
Tighten with Allen key (8).
Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface to
make sure the chair is level and then tighten the bolts.