Instructions / Assembly

I
TEM
N
O
.
: C
-
2
REVISED JUL 4, 2012
Printed in Vietnam
- 3 -
HARDWARE LIST
When unpacking, please carefully not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO Description Qty Sketch NO Description Qty Sketch
1
Short bolt
( M6x40mm)
3 2
Medium bolt
(M6x60mm)
4
3
Long bolt
(M6x80mm)
4 4
Wood Screw
(M4x35mm)
8
5
Lock Washer
(Þ6.5x13mm)
11 6
Flat Washer
(Þ6.5X19mm)
11
7
Allen Key
(4mm)
1
STEP 1
Attach Seat Frame (B) to the Back (A) by using bolts (3) and (1), Washers (5) and (6) tighten with Allen
Key (7) as shown below.
Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface to
make sure the chair is level and then tighten the bolts.