Instructions / Assembly

ITEM NO.: C-20
REVISED DEC 02, 2016
VERSION 2017
Printed in Vietnam
- 4 -
STEP 1
Attach seat frame (B) to the back (A) with bolts (1) and (3), and washers (5) and (6) as shown below.
Tighten with Allen Key (7).
Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface
to make sure the chair is level and then tighten the bolts.
STEP 2
Attach front legs (D) to the seat frame (B) with bolts (2), and washers (5) and (6) as shown below.
Tighten with Allen Key (7).
Attach middle stretcher (F) to side stretchers (E) with screws (4). Then attach stretchers (E) to front
and back legs with screws (4) as shown below. Tighten with a screwdriver.