Instructions / Assembly

ITEM NO.: C-19
REVISED NOV 22, 2016
Printed in Vietnam
- 3 -
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Q’ty
Sketch
NO
Description
Q’ty
Sketch
1
Short bolt
(M6 x 40mm)
3
2
Medium bolt
(M6 x 60mm)
4
3
Long bolt
(M6 x 80mm)
4
4
Screw
(M4 x 35mm)
8
5
Lock washer
(ɸ6.5 x 11mm)
11
6
Flat Washer
(ɸ6.5x19mm)
11
7
Allen key
(M4x30mmx120mm)
1
8
Wood button
(M10.5 x 7mm)
4
STEP 1
Attach seat frame (B) to the back (A) with bolts (1) and (3), and washers (5) and (6) as shown below.
Tighten with Allen Key (7).
Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface
to make sure the chair is level and then tighten the bolts.