ASSEMBLY INSTRUCTIONS Description Item No. : JAVA CHAIR WITH WOOD SEAT : C-19 ITEM NO.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free 888-944-8396.
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Q’ty 1 Short bolt (M6 x 40mm) 3 Sketch NO Description Q’ty 3 2 Medium bolt (M6 x 60mm) 4 Long bolt (M6 x 80mm) 4 4 Screw (M4 x 35mm) 8 5 Lock washer (ɸ6.5 x 11mm) 11 6 Flat Washer (ɸ6.5x19mm) 11 7 Allen key (M4x30mmx120mm) 1 8 Wood button (M10.
STEP 2 Attach front legs (D) to seat frame with bolts (2), and washers (5) and (6) as shown below. Tighten with the Allen key (7). Attach the side stretchers (E) to front and back legs with screws (4) as shown below. Tighten with a screwdriver. STEP 3 Attach the seat (C) to top of the seat frame (B) with screws (4) as shown below. Tighten with a screwdriver. Insert wood buttons (8) to the holes on chair back (A) as shown below. ITEM NO.
