Instructions / Assembly

ITEM NO: C-126
REVISED JUL 18, 2015
Printed in Vietnam
- 4 -
STEP 1
Attach seat frame (B) to the back (A) with bolts (1) and (3), washers (7) and (6), as shown below.
Tighten with Allen key (11).
Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface to
make sure the chair is level and then tighten the bolts.
STEP 2
Attach front legs (D) to the seat frame (B) with bolts (2), and washers (7) and (6). Tighten with Allen
key (11).
Place side stretchers (E) and middle stretcher (F) between front and back legs. Attach stretchers with
the screws (5) and screws (4) as shown below. Tighten with a screwdriver.