ASSEMBLY INSTRUCTIONS Description Item No.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased. If hardware is missing, or you need help with assembly, please call toll free 888-944-8396.
PART LIST When unpacking, please be careful not to discard any parts with the packaging.
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty 1 Allen key (M4 x 30mm x 120mm) 3 5 NO Description Qty 1 2 Bolt (M6 x 30mm) 8 Spring washer (6.5 x 11mm) 8 4 Flat washer (6.5 x 13mm) 8 Long screw (M4 x 35mm) 9 6 Pan head screw (M4 x 30mm) 1 Knob 1 8 Steel band 1 Short screw (M3.
STEP 2 Attach bottom panel (C) to the side panel (B) with bolts (2), and washers (3) and (4) .Tighten with Allen key (1). Slide back panel (D) into the grooves as shown below. STEP 3 Attach bottom panel (C), and the top (A) to the other side panel (B) with bolts (2), and washers (3) and (4) as shown below. Tighten with Allen key (1).
STEP 4 Attach drawer sides (F) to drawer front (E) with screws (5) as shown below. Tighten with a screwdriver. Then Insert drawer bottom (H) into the grooves at bottom of drawer sides (F) as shown below. STEP 5 Attach drawer back (G) to drawer sides (F) with screws (5) as shown below. Tighten with a screwdriver. STEP 6 Attach knob (7) to front of drawer with pan head screw (6) as shown below. Tighten with a screwdriver.
STEP 7 Carefully put the drawer (from step 7) into the unit. STEP 8 Attach the steel band (8) to the unit with short screws (9) and attach the steel band to the wall with the long screw (5) as shown below (to secure the product and prevent tipping). Tighten with a screwdriver.
