Instructions / Assembly

ITEM NO.: BD-8013
REVISED DEC 07, 2016
Printed in Vietnam
- 8 -
Attach steel bands (8) to the unit with screws (9) as shown below.
(to secure the product to the wall and reduce the risk of tipping over).
Important!
Properly attach steel bands (8) to the wall in an area of drywall or plaster with a wood stud:
Mark the attachment point(s) with a pencil at the appropriate height positioned over the wood stud(s)
in the wall.
Drill 1/8-inch (3mm) diameter hole(s) into the wood stud(s) located in the wall, where you marked
with the pencil.
Properly attach steel bands to the wall with screws (4) and tighten screw(s) firmly into the wall.
STEP 9