User's Manual
Table Of Contents
- Finding information with Access ThinkPad
- Contents
- Chapter 1. Overview of your new ThinkPad computer
- Chapter 2. Solving computer problems
- Chapter 3. Getting help and service from IBM
- Appendix A. Important safety instructions
- Appendix B. Warranty information
- Appendix C. Wireless regulatory information
- Appendix D. Notices
- Processing date data
- References to the Web site addresses
- Electronic emission notices
- Telecommunication notices
- Industry Canada requirements
- Notice for Australia
- Notice for New Zealand
- Notice for European Union countries
- Wireless Interoperability
- Usage environment and your Health
- Product notice requirements
- Trademarks
- Index
Replacing the battery
1. Turn off the computer, or enter hibernation mode. Then disconnect the ac
adapter and all cables from the computer.
Note: If you are using a PC Card, the computer might not be able to enter
hibernation mode. If this happens, turn off the computer.
2. Close the computer display, and turn the computer over.
3. Slide the battery latch to unlock it 1; then remove the battery 2.
Note: The first position of the battery latch is for releasing the lock of the
battery.
4. Align the side of a fully charged spare battery with the side of the battery
space in the computer 1; then gently push the battery into the space 2.
5. Slide the battery latch to lock it.
6. Turn the computer over again. Connect the ac adapter and the cables to
the computer.
Replacing the battery
32
ThinkPad
®
T23 Special Business Use