User's Manual
Table Of Contents
- Finding information with Access ThinkPad
- Contents
- Chapter 1. Overview of your new ThinkPad computer
- Chapter 2. Solving computer problems
- Chapter 3. Getting help and service from IBM
- Appendix A. Important safety instructions
- Appendix B. Warranty information
- Appendix C. Wireless regulatory information
- Appendix D. Notices
- Processing date data
- References to the Web site addresses
- Electronic emission notices
- Telecommunication notices
- Industry Canada requirements
- Notice for Australia
- Notice for New Zealand
- Notice for European Union countries
- Wireless Interoperability
- Usage environment and your Health
- Product notice requirements
- Trademarks
- Index
5. Open the computer display; then stand the computer on its side and
remove the hard disk drive by pulling the cover away from the
computer.
6. Detach the cover from the hard disk drive.
7. Attach the cover to a new hard disk drive.
8. Insert the hard disk drive and its cover into the hard disk drive bay; then
firmly install them.
9. Turn the computer over so that its bottom side is up. Reinstall the screw.
Note: You can replace the coin screw with a security screw to prevent
the hard disk drive from being removed easily. The security screw
might not be included in the box with your ThinkPad computer.
You can, however, purchase screw directly from NABS at
www.nabsnet.com
10. Reinstall the battery.
11. Turn the computer over again. Connect the ac adapter and the cables to
the computer.
Upgrading the hard disk drive
Chapter 2. Solving computer problems 31