International Business Machines Model: J07M067 Bluetooth Standard Class 2 Adapter : User's Manual : Page 26

v The equipment shall go on-hook for a period of not less than 30 seconds

between the end of one attempt and the beginning of the next call attempt,

and

v Automatic calls to different numbers shall be spaced such that there is not

less than 5 seconds between the end of one call attempt and the beginning

of another, and

v Incoming calls shall be answered between 3 and 30 seconds of receipt of

ringing.

This

equipment shall not be set up to make automatic calls to Telecom’s 111

Emergency Service.

The availability of the Modem on Hold feature is dependent on whether or

not your Internet Service Provider and the Telecom network are connected to

offer this feature.

Any attempt to make use of ″Modem on Hold″ with this particular type of

modem may work incorrectly due to the unequal sharing of the current fed to

your line by this modem and the telephone you are using. No guarantees can

be given as to the effectiveness of the Modem on Hold feature offered by this

modem. Such problems are NOT a network fault and should not be

reported to Telecom.

Telecom can accept no liability for the mis-operation of the Modem on Hold

facilities with devices of this type. Only modems Telepermitted in the PTC

218-series are recognised as being V. 9 2 Modem on Hold capable.

Notice for users in Singapore

For models: J07M067, WM3B2100, WM3B2200BG, WM3B2915ABG, T60H786,

AR5BMB-44

OPERATING

CONDITIONS UNDER WHICH THE

RADIOCOMMUNICATION EQUIPMENT ARE EXEMPTED FROM

LICENSING

To maximize frequency sharing while minimizing radio interference, the

following operating conditions are imposed to confine the propagation of

radio signals within a building or at a localised site:

a)

The radiocommunication equipment shall be used for in-building or

localised on-site operations;

b)

The radiocommunication equipment shall operate at frequencies or

frequency bands designated by IDA on non-exclusive basis;

c)

The radiocommunication equipment shall not operate beyond the

maximum permissible output power designated by IDA to confine the

propagation of radio signals to a small localised area;

Other countries 21