User's Manual

Replacing the hard disk drive
You can increase the storage capacity of your computer by replacing
the hard disk drive with one of greater capacity. You can purchase a
new hard disk drive from your IBM reseller or IBM marketing repre-
sentative.
Note: Replace the hard disk drive only if you upgrade it or have it
repaired. The connectors and bay of the hard disk drive were
not designed for frequent changes, or drive swapping.
Attention: Handling a hard disk drive:
 Do not drop the drive or subject it to physical shocks.
 Do not apply pressure to the cover of the drive.
 Do not touch the connector.
Notes:
1. The drive is very sensitive. Incorrect handling can cause damage
and permanent loss of data on the hard disk.
2. Before removing the hard-disk drive, make a backup copy of all
the information on the hard disk, and then turn the computer off.
3. Never remove the drive while the system is operating, in standby
mode, or in hibernation mode.
To replace the hard disk drive, do the following:
1. Turn off the computer; then disconnect the ac adapter and all
cables from the computer.
2. Close the computer display, and turn the computer over.
3. Remove the battery by sliding and holding the battery latch in the
unlock position (1); then sliding (2) and lifting up the battery (3).
22 ThinkPad i Series 1200/1300 Service and Troubleshooting Guide