User Manual

Testing your computer

If you have a problem with your computer, you can test it by using

PC-Doctor. To run PC-Doctor, do as follows:

1. Click Start.

2. Move the cursor to Programs and then to PC-Doctor for

Windows.

3. Click PC-Doctor for Windows.

4. Choose either the Quick Test or the standard test.

Attention

Running the Quick Test set can take 10 minutes or longer. Make

sure you have time to run the entire test; do not interrupt the test

while it is running.

The Quick Test runs many tests of critical hardware components, but

it does not run all of the diagnostic tests in PC-Doctor. If PC-Doctor

reports that all of the tests in the Quick Test set have been run and

that it has found no problems, consider running additional tests in

PC-Doctor.

If you are preparing to contact IBM for support, be sure to print the

test log so that you can rapidly provide information to the help techni-

cian.

Solving computer problems 33