User`s guide

Chapter 3 — SR61T Interfaces
SR61T Tethered Scanner User’s Guide 27
Keyboard Wedge/Y-Cable Interface
The SR61T can be connected to a host using a keyboard wedge or Y-
cable. Power is provided either by the host or by the external power
supply connected to the cable. See the “Required Accessories” on
page 5 for a list of part numbers for the different cables
Connecting a Keyboard Wedge or Y-Cable
To connect with a keyboard wedge cable
1 Turn off your host device.
2 Connect the keyboard wedge cable to your SR61T and the host.
3 Connect the power supply to the cable and an AC power outlet if
you are using the externally powered keyboard wedge cable.
Keyboard wedge cable
Keyboard wedge with power jack