User Manual

Appendix B — Printer Settings
50 PR2 and PR3 Mobile Receipt Printer User Manual
Client Certificate Sets the name of the client
certificate the printer uses to
authenticate to the network using
EAP-TLS. Maximum length is 128
characters.
None
Client Key Sets the private key the printer uses
for EAP-TLS. Maximum length is
128 characters. Use the
certinstall.sh script to install the
certificate correctly.
None
Server Common
Name 1
Sets the certificate name that is on
the primary authentication server. If
this value is none, then the value for
Server Common Name 2 is
used.Range is 1 to 96 characters.
None
Server Common
Name 2
Sets the certificate name that is on
the secondary authentication
server.If this value is none, then the
value for Server Common Name 1 is
used.Range is 1 to 96 characters.
None
Validate Certificate Determines if the identity of the
authentication server is verified
using its certificate when using
EAP-TTLS, PEAP, or
EAP-TLS.Intermec recommends
that you set Validate Certificate to
Yes.
No
PAC Sets the name of the Protected
Access Credential (PAC) that is used
for EAP-FAST authentication. The
printer uses this file if Acquire PAC
is on and the current installed PAC
fails to authenticate the printer to
the network.
eap-fast.pac
Acquire PAC Determines if automatic PAC file
provisioning is on for EAP-FAST
authentication.
Off
Wireless 802.11 Security Settings (Continued)
Setting Description Default