User Manual

Chapter 2 — Connect and Configure the Printer
PR2 and PR3 Mobile Receipt Printer User Manual 19
3 Click Configuration.
4 When prompted, type your Username and Password. The default
username is admin and the default password is pass.
5 Click Login.
6 Select Network Admin > Wireless 802.11.
7 Change the necessary settings.
8 When you are done, click Submit.
Configure Wi-Fi Communications Using PrintSet
Before connecting to a wireless network, make sure you know the
settings you need for your network.
If you are not using a DHCP network and you do not know your
printer IP address, you must configure Wi-Fi settings using Intermec
PrintSet 5.2 or later with a USB connection.
1 Connect your printer to a desktop PC with USB.
2 Download and install Intermec PrintSet 5.2 or later from the
Intermec website at www.intermec.com.
3 Use the PrintSet online help to add your printer to PrintSet and
configure the necessary wireless communications settings.
About Bluetooth Communications
Printers with the Bluetooth radio option support Bluetooth
communications.When Bluetooth is enabled, you can connect the
printer to other Bluetooth devices, such as bar code scanners. You can
also make the printer discoverable by Bluetooth-enabled devices such
as mobile computers. You configure Bluetooth communications using
PrintSet 5.2 or later through a USB connection to your host PC.
Note: The first time you create a USB connection to a desktop PC, you
must use Intermec InterDriver to install the appropriate driver
software on your PC.