User Manual
Table Of Contents
- Send Feedback
- Before You Begin
- Chapter 1 - About the Printers
- Chapter 2 - Connect and Configure the Printer
- Chapter 3 - Troubleshoot and Maintain the Printer
- Appendix A - Specifications
- Appendix B - Printer Settings
Chapter 1 — About the Printers
10 PR2 and PR3 Mobile Receipt Printer User Manual
You can change the printer command language from the printer web
page or by using PrintSet version 5.2 or later.
Set the Command Language Using PrintSet
You can connect your printer to a desktop PC through a USB
connection and use PrintSet 5.2 or later to set the command language.
1 Connect your printer to a desktop PC with a USB cable.
2 Download and install Intermec PrintSet 5.2 or later from the
Intermec website at www.intermec.com.
3 Use PrintSet to add your printer to PrintSet and set the command
language.
Load Media
The printers support easy drop-in media loading.
1 Lift both media release latches to open the media door.
2 If necessary, remove the empty media core from the media
compartment.