User Manual
Table Of Contents
- Send Feedback
- Before You Begin
- Chapter 1 - About the Printers
- Chapter 2 - Connect and Configure the Printer
- Chapter 3 - Troubleshoot and Maintain the Printer
- Appendix A - Specifications
- Appendix B - Printer Settings
Chapter 1 — About the Printers
PR2 and PR3 Mobile Receipt Printer User Manual 7
About the Battery
The printer uses a rechargeable lithium-ion battery (Model 1013AB01
or 1013AB02) for power. You must fully charge the battery before you
can use the printer.
Install the Battery
1 Swing the belt clip so it does not block the battery compartment.
For the printer to work, a battery must always be installed in the
printer.
Caution: Use Intermec Model 1013AB01 or 1013AB02 battery
only. Use of another battery may present a risk of fire or
explosion. The Model 1013AB01 or 1013AB02 battery may present
a fire or chemical burn hazard if mistreated. Do not disassemble,
heat above 80 °C (176 °F), or incinerate. Dispose of used batteries
promptly. Keep away from children.