User`s manual
Appendix B — Default Settings
124 PM43 and PM43c Mid-Range Printer User Manual
Display and Audio Settings
This section describes display and audio settings for the printer. To
view these settings:
• From the printer Main Menu, select Settings > System Settings >
Display.
• From the printer web page, click the Configure tab > System
Settings > Display or Audio.
Date Sets the current date. System date
Sleep Timer Selects the amount of time the
printer waits before it goes to
Sleep mode.
Disable
Command Language Sets the printer command
language. If changed, requires
restart.
Fingerprint
Alert Notification
Method
Selects how you want the printer
to notify you of printer alerts.
SNMP Trap +
Email
Unit of Measure Selects the unit of measure that
is used to define several printing
parameters.
Dots
Setting Description Default
Setting Description Default
Brightness Selects the brightness of the printer screen. Medium
Idle Information Selects the information that appears on the
printer screen when it is in Idle mode.
IPv4 address
Time Format Selects the format used to display time on
the printer.
24 Hour
Date Format Selects the format used to display date on
the printer.
dd/mm/yyyy
Menu Access Determines if the Menu button on the
printer web page is accessible.
Enable
PIN Sets the password that allows access to the
Menu button on the printer web page, if
the Menu Access parameter is set to Enable
With PIN. Range is 4 to 16 characters.
1234
Screen Timeout Selects how long the printer screen stays on
before the screen saver starts.
Disable