User`s manual

Chapter 3 — Configuring the Printer
72 PF2i and PF4i Mid-Range Printer User’s Manual
Old Admin
Password
You need to enter the old password before you can
change the password.
New Admin
Password
The new password you want to use.
Restrictions Sets restrictions on who is allowed to upgrade the
printer firmware or view and change network settings.
You cannot remove “admin” from the list of authorized
users.
Users allowed to update: Defines who may perform a
firmware upgrade using FTP, PrintSet, or IFAB. This
setting does not affect upgrading from a Compact
Flash card.
Users allowed to read/write protected LAN1
settings: (Fingerprint only) Defines who may read/
write settings in the LAN1 section.
Users allowed to change network settings:
(Fingerprint only) Defines who may change the
network node in the setup. This setting is not
supported if you are setting up the printer from its
internal keyboard.
Users allowed to change wireless settings: Defines
who may change WLAN or 802.1x settings.
Understanding the General Network Settings (continued)
Setting Description