User`s manual

Appendix A — Specifications
PF2i and PF4i Mid-Range Printer User’s Manual 139
Tickets With Gaps (Gap Stock)
PF2i Media Width Including Liner (a)
Measurement Value
Maximum 60 mm (2.36 in)
Minimum, standard guides 25.0 mm (1.00 in)
Minimum, quick-load guides 40 mm (1.57 in)
PF4i Media Width Including Liner (a)
Measurement Value
Maximum 114.3 mm (4.50 in)
Minimum, standard guides 25.0 mm (1.00 in)
Minimum, quick-load guides 40 mm (1.57 in)
Minimum, wide quick-load guides 80.0 mm (3.15 in)
Copy Length (b)
Measurement Value
Maximum length between slots Dependent on SDRAM size
Minimum length between slots 8.0 mm (0.32 in)
Note: Under ideal circumstances, a minimum ticket length of 4 mm
(0.16 in) could be used. It requires the sum of the copy length (b) and
the detection slit height (e) to be larger than 7 mm (0.28 in), that batch
printing is used, and that no pull back of the media is performed.
Intermec does not guarantee that such short tickets will work, but it is
up to users to test this in their unique application.