User Manual
Table Of Contents
- Before You Begin
- Chapter 1 — About the Printers
- Chapter 2 — Set Up the Printer
- Adjust the Media Holders
- Load Media for Straight-Through Printing
- Load Media for Cut-Off Printing
- Load Media for the Label Dispenser
- Load Ribbon
- Use External Media
- Connect the Printer to Power
- Use the Setup Wizard
- Print Print Quality Labels from the Main Menu
- Print Configuration Labels from the Main Menu
- Media Settings
- Chapter 3 — Connect the Printer
- Chapter 4 — Configure the Printer
- Chapter 5 — Troubleshoot the Printer
- Chapter 6 — Maintain the Printer
- Appendix A — Specifications and Default Settings
- Printer Specifications
- Supported Bar Code Symbologies
- Bluetooth Settings
- Display and Audio Settings
- Error, Information, and Warning Alert Settings
- Ethernet Settings
- General System Settings
- Media Settings
- Print Quality Settings
- Serial Port Settings
- System I/O Settings
- System Network Services
- System Maintenance Alert Settings
- Wireless 802.11 General Settings
- Wireless 802.11 Network Settings
- Wireless 802.11 Security Settings
- Appendix B — Print Labels with INPrint
Chapter 1 — About the Printers
PC23 and PC43 Desktop Printer User Manual 25
These replacement parts are also available for the PC23 and PC43:
• 203-dpi printhead
• Standard platen roller
• AC power adapter
For information on these accessories and replacement parts, contact
your Intermec representative.
About the Battery Base
Instead of using the AC power supply, you can use the optional battery
base to provide power for the PC43d printer. Depending on your
printer duty cycle, the rechargeable battery in the battery base provides
up to 8 hours of power.
Linerless Module Non-stick platen roller dispenses printed
labels when you use linerless media stock. For
PC43.
Battery Base Pedestal-style base holds rechargeable battery
(sold separately) and attaches to base of
printer. Uses printer AC power adapter to
charge battery. For PC43d.
Rechargeable battery For use with Battery Base.
Power Adapter Base Pedestal-style base attaches to base of printer
and holds AC power adapter. For PC43d.
Accessory Description
Note: Battery life depends on many factors. The battery is designed to
provide 8 hours of charge (plus one hour of standby time) when you
are printing a 150-mm (6-in) label every 7 minutes.