User Manual

Appendix A — Specifications
PB22/PB32 Mobile Label and Receipt Printer User’s Guide 55
Receipt roll stock media is supplied as a continuous roll. Label, tag,
and fanfold media use repeat indicators for non-continuous media.
Gap, notch, and black marks are used as repeat indicators:
• Gap: Label and fanfold media
• Notch: Tag media
• Black mark: Label, tag, and fanfold media
Here are a few things to keep in mind when ordering media for the
PB22/PB32 printer:
• Black marks can be sensed on the front or back side of the media.
Print Speed and Resolution
Print speed: 4 ips (100 mm/s)
Resolution: 203 dpi (8 dots/mm)
Print Technology
Printhead: Direct thermal
Maximum print width: PB22 48mm (1.8 in)
PB32 72mm (2.8 in)
Media Specification
Minimum gap and black mark length: 3.17 mm (0.125 in)
Minimum gap, black mark, and notch length: 12.7 mm (0.50 in)
Minimum notch length: 6.35 mm (0.25 in)
Minimum notch width: 12.7 mm (0.50 in)
Black mark width: Full width of media
Core inside diameter: 19.05 mm (0.75 in)
Roll outside diameter: PB22 57.15 mm (2.25 in)
PB32 67.31 mm (2.65 in)
Tracking1: Center
Minimum caliper for label with liner and
receipts:
0.05 mm (0.002 in)
Maximum caliper for label with liner and
rein))ceipts:
0.165 mm (0.0065 in)
Maximum media length 609.6 mm (24.0 in)