User Manual

Chapter 3 — Troubleshooting and Maintaining the PB22/PB32
50 PB22/PB32 Mobile Label and Receipt Printer User’s Guide
Cleaning the Printer
To properly maintain your PB22/PB32, you should clean it at the
recommended intervals.
PB22/PB32 Mobile Label Printer: Identifying the parts of the PB22/PB32 to
clean regularly
To avoid possible personal injury or damage to the printer,
never insert any pointed or sharp objects into the printer.
Use only the cleaning agents specified in this section. Intermec
is not responsible for damage caused by any other cleaning
materials used on this printer.
Cleaning the PB22/PB32 Printer
Printer Part Cleaning Method Cleaning Interval
Platen Roller Rotate the platen roller and
clean it thoroughly with 70%
isopropyl alcohol on a
cotton swab.
Do not clean the linerless
platen roller with isopropyl
alcohol.
After every five rolls of
media or more often if
necessary.
Tear bar
Paper sensor
Label taken
sensor
Platen roller
Label gap sensor
Printhead