User Manual

Chapter 2 — Configuring the PB22/PB32
32 PB22/PB32 Mobile Label and Receipt Printer User’s Guide
7 Verify that the PB22/PB32 is connected to the access point and
make sure it has an IP address allocated to it.
Understanding the 802.11 Radio Icons
Use the following sections to set most of your wireless
communication settings. For help with additional commands and
information, see either the Fingerprint Programmer’s Reference Manual
(P/N 937-005-xxx) or the IPL Programmer’s Reference Manual
(P/N 937-007-xxx). You can download both documents from the
Intermec web site at www.intermec.com.
Configuring Wireless Printing Using IPL
Use the following procedures to configure your PB22/PB32 with IPL
for wireless printing.
To configure the printer to use WEP authentication
1 Send the following commands to login as an admin and set the
SSID:
<STX><ESC>.x,su -p pass admin<ETX>
<STX><SI>ws,SSID,xxxxx<ETX>
Icon Description
Excellent signal
Strong signal
Good signal
Weak signal
Poor signal
No signal