User Manual

Chapter 2 — Configuring the PB22/PB32
28 PB22/PB32 Mobile Label and Receipt Printer User’s Guide
2 Send the enable administrator rights command:
<STX><ESC>.y, su -p pass admin <ETX>
3 Send the run command to change the printer language:
<STX><EXC> .y,setlanguage FP -r<ETX>
To change the printer language using ESC/P and HyperTerminal
1 Select Start > Accessories> Communications > Hyperterminal
to start HyperTerminal.
2 Enter U-shell. Press the ESC key and type:
{SYS:USH}
3 Send the enable administrator rights command:
su -p pass admin
4 Send the run command to change the printer language:
setlanguage IPL -r
Establishing Communications With a Host
The PB22/PB32 must establish communications with a host that will
send the data for the printer to print. The PB22/PB32 provides four
ways to communicate with a host:
• Bluetooth radio communications
• 802.11 b/g radio communications
• USB communications
• Serial communications
Setting Up Bluetooth Communications
The PB22/PB32 can contain a Bluetooth radio that allows wireless
communications with a remote device from distances up to 100
meters (approximately 328 feet) depending on the Bluetooth range
capabilities of the remote device, environmental conditions, and
obstructions. For the Bluetooth-enabled devices to exchange data,
both devices must establish a connection. Bluetooth software is
always running in the background.