User Manual

Chapter 2 — Configuring the PB22/PB32
PB22/PB32 Mobile Label and Receipt Printer User’s Guide 23
Sample Extended Test Mode Screen
To enter Extended Test mode
1 Make sure that the printer is loaded with media.
2 Press the media cover release button to open the media cover.
3 Press the Standby button to turn the printer off.
4 Press Feed and Standby buttons at the same time until CLOSE
PRINTER DOOR appears on the screen.
5 Close the media cover. You are now in Extended Test mode.
• Press to cycle through the options.
• Press to select a test option.
• Press to exit Extended Test mode.
Options in Extended Test Mode
Function Description
Select Media This option is almost the same as the process in Test
mode, except that the printer performs a slow test
feed in Extended Test mode. The slow test feed
enables the printer to perform a slow sensor
calibration which can help resolve gap or mark
detection problems.
Test Labels This option allows you to print test labels one at a
time. Press to print the next label.
Dump Mode This options enters Dump mode. For more
information on Dump mode,
see “Troubleshooting
Communication Problems” on page 46.
Factory Default This option restores the factory default settings. Press
to select this option and then follow the
instructions on the screen.
OK
TEST LABELS
CHESS