User Manual

Chapter 1 — Using the PB22/PB32 Mobile Label and Receipt Printer
16 PB22/PB32 Mobile Label and Receipt Printer User’s Guide
Printing a Test Page
After you have loaded media in the printer, you are ready to print a
test page. You can choose from several test page options for each of
the printer language. If you cannot get the test page information to
print, see “Troubleshooting the PB22/PB32” on page 42.
To print a test page with a PB22/PB32 loaded with IPL
1 Press the Setup button.
2 Press until you reach Test/Service.
3 Press to enter the Test/Service menu system.
4 Press to enter the Testprint Config menu.
5 Press to enter the Config menu.
6 Press to choose a testprint.
7 Press to print the Config testprint of your choice.
To print a test page with a PB22/PB32 loaded with Fingerprint
1 Press the Setup button.
2 Press until you reach Print Defs.
3 Press to enter the Print Defs menu system.
4 Press until you reach Testprint.
5 Press to enter the Testprint menu.
6 Press to choose a testprint.
7 Press to print the testprint of your choice.
To print a self test with a PB22/PB32 loaded with ESC/P
• Send the ESC EZ{TP} command to the printer.