User Manual

Chapter 1 — Using the PB22/PB32 Mobile Label and Receipt Printer
12 PB22/PB32 Mobile Label and Receipt Printer User’s Guide
3 Insert a roll of media and close the media supports so the roll is
held firmly in place. Make sure you load the media clockwise so
that it pulls off the core from the bottom of the printer.
4 Lock the media support lock.
5 Pull out approximately 8 cm (3 in) of the media.
Media
support lock
Note: The only time you need to unlock and lock the media support
lock again it is when you are changing to a roll with a different width.