User Manual

Chapter 1 — Using the PB22/PB32 Mobile Label and Receipt Printer
PB22/PB32 Mobile Label and Receipt Printer User’s Guide 3
Understanding the Control Panel
The PB22/PB32 control panel contains four buttons, a liquid crystal
display (LCD), and one LED indicator. Use the four buttons to
navigate the menu system and perform functions on the PB22/PB32
printer. See the following tables to understand the buttons, the menu
system, and what the LED means.
Printer Control Panel
Understanding How to Use the PB22/PB32 Buttons
Button
Name
Button Function
Feed Press to advance label or receipt paper. The amount of
media that feeds is dependent on the type of media you
are using. It will advance by 5 mm (0.2 inch), feed out
an entire label, or feed a configured length of media
based on your media and settings.
If the printer is printing, pressing this button causes
the printer to pause. Press the button again to resume
printing.
Setup Press to display the Setup menu. Not used with ESC/P
firmware.
Standby
(Power)
Press to put the printer in Standby mode. In Standby
mode, power to the radio, the display, and the
backlight are turned off.
Press to turn the printer back on and put in Ready
mode.
OK
SETUP:
SER-COM
Standby button Info button
Feed button
Setup button
Ready-to-Work
indicator