User`s manual

Chapter 4 — Managing, Upgrading, and Troubleshooting the IF30
66 IF30 Fixed Reader User’s Manual
Restoring the IF30 to the Default Configuration
1 From the menu, click Save/Discard Changes. The Save/Discard
Changes screen appears.
2 Click Restore Factory Defaults. A list of parameters that will be
changed appears in the Pending Changes list.
3 Click Save Changes and Reboot. The IF30 reboots and the
default configuration is restored.
Upgrading Firmware
This section explains how to import and install the IF30 and RFID
firmware upgrades to the IF30.
Note: To upgrade the firmware, use only files provided by Intermec.
Be sure to contact your Intermec RFID system consultant before
upgrading.
Make sure the IF30 is connected to a reliable AC power source
before you upgrade the firmware. Do not cycle power to the IF30
during the upgrade. If AC power is lost during the upgrade, the
IF30 may require factory repair.