User`s manual

Chapter 4 — Managing, Upgrading, and Troubleshooting the IF30
56 IF30 Fixed Reader User’s Manual
Managing the IF30
There are several methods you can use to manage the IF30. You can
use:
• a web browser. For help, see “Using the Web Browser Interface”
on page 14. This manual assumes that you are using this method
for all procedures.
• Intermec SmartSystems Foundation. For help, see the next
section.
• the Wavelink Avalanche client management system. For help, see
“Using Wavelink Avalanche” on page 57.
• an SNMP management station. For help, see “Enabling Simple
Network Management Protocol (SNMP)” on page 59.
Using SmartSystems Foundation
The IF30 ships with a SmartSystems client, which means you can
manage it from a central host PC using Intermec’s SmartSystems
Foundation. The SmartSystems console displays all SmartSystems-
enabled devices in your network.
SmartSystems Foundation is available for free from the Intermec web
site. To download SmartSystems Foundation, go to
www.intermec.com/SmartSystems. For information on using the
SmartSystems console, in the console choose SmartSystems > Help.
Configuring the IF30 With Intermec Settings
This section explains how to configure the IF30 with Intermec
Settings.
To configure the IF30 with Intermec Settings
• In the console, right-click an IF30 and choose Intermec Settings
from the menu. The Intermec Settings browser appears.
For help using Intermec Settings, in the Intermec Settings browser
choose Help > Online Manual.