User`s manual

Chapter 3 — Creating and Using RFID Applications
44 IF30 Fixed Reader User’s Manual
About RFID Module Settings
This section explains the module settings. Most settings have BRI
attribute equivalents. For more information, see the Basic Reader
Interface Programmer’s Reference Manual.
Supported Tag Type
Sets the type of tag for RFID operations. Certain performance
improvements can be realized if you choose the best setting for your
system. The more specific the selection, the better the performance.
See the next table for more information.
This setting is equivalent to the TAGTYPE BRI attribute.
Supported Tag Type (Gen 2)
Enables or disables Gen 2 tag support for RFID operations. Choose
EPC Class 1 Gen 2 (default) to enable Gen 2 support, or None to
disable Gen 2 support.
Dense Reader Mode
Check this check box to enable Dense Reader mode, which is only
supported by EPC Class 1 Gen 2 tags. When dense reader mode is
enabled, these tags respond with Miller Sub carrier encoded data
instead of FM0 encoded data.
This setting is equivalent to the DENSEREADERMODE BRI
attribute.
Tag Type Descriptions
Tag Type Description
Phillips v1.19 Phillips v1.19
ISO6B/G1 ISO6B Generation 1
ISO6B/G2 ISO6B Generation 2
EPC Class 1 Gen 2 (default) EPCglobal Class 1 Gen 2