User`s manual

Chapter 2 — Configuring Network Settings
IF30 Fixed Reader User’s Manual 25
To configure Ethernet settings
1 From the menu, click Ethernet. The Ethernet screen appears.
2 Configure the Ethernet settings. For help, see the next table.
If you need to configure DNS/Network Services settings, such as
DNS addresses or suffixes, or a SYSLOG destination, see
“Configuring Network Services” on page 28.
3 Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes, and
then click Save Change and Reboot. For help, see “Saving
Configuration Changes” on page 16.
Note: Different settings appear in this screen depending on the
current DHCP mode for the IF30.