User`s manual

Chapter 1 — Getting Started
14 IF30 Fixed Reader User’s Manual
9 Disconnect the null-modem cable and AC power cable from the
IF30.
The IF30 is now ready to be connected to your network. See
“Connecting the IF30 to Your Network” on page 19.
Using the Web Browser Interface
After you have set the initial IP address, you can configure and
manage the IF30 remotely using the web browser interface. The IF30
web browser interface has been tested using Internet Explorer 6.0.
Using other browsers may provide unpredictable results.
To use the web browser interface, the IF30 must be connected to your
wired Ethernet.
If your session terminates abruptly or a new login screen appears,
someone else may have accessed the IF30. When using the web
browser interface, remember that your session terminates if you do
not use it for 15 minutes.
To use the IF30 web browser interface
1 Determine the IP address of the IF30. If a DHCP server assigned
the IP address, you need to get the IP address from that server.
2 Start Internet Explorer.
Note: If you access the Internet using a proxy server, add the IF30 IP
address to your Exceptions list. The Exceptions list contains the
addresses that you do not want to use with a proxy server.