User`s manual

Chapter 1 — Getting Started
IF30 Fixed Reader User’s Manual 13
4 (Optional) To configure DNS settings, choose Network Services
and press Enter. The Network Settings screen appears.
5 Configure the DNS settings as needed:Configure these settings:
6 Press the left arrow key to return to the main reader configuration
menu.
7 Press the down arrow key to select Save Configuration and then
press Enter. The new settings are saved.
8 Press the down arrow key to select Reboot and then press Enter.
The IF30 reboots. When the boot process is finished, you see
“Starting system…” at the bottom of the HyperTerminal screen.
Parameter Setting
Hostname
Hostname for this IF30. The default is IF30 pre-
pended to the serial number of the unit.
This can be a simple hostname or a fully
qualified domain name (FQDN). If this device
obtains its IP address via DHCP, this parameter
is also sent to the DHCP server. If the DHCP
server supports it, this field will be used for
dynamic DNS (DDNS) updates.
DNS Address 1
IP address of a domain name server that the IF30
uses to resolve DNS names.
DNS Address 2
IP address of a domain name server that the IF30
uses to resolve DNS names if the DNS server at
DNS Address 1 is not responding.
DNS Suffix 1
Domain name suffix that will be appended to
DNS names that cannot be resolved.
DNS Suffix 2
Domain name suffix that will be appended to
DNS names that cannot be resolved either by
themselves or using DNS suffix 1.