User`s manual

Chapter 1 — Getting Started
12 IF30 Fixed Reader User’s Manual
2 With Ethernet selected in the IF30 RFID Reader Configuration
menu, press the right arrow. The Ethernet menu appears.
3 Configure these settings:
Or, press the down arrow key to select IPv6 Configuration, and
then press the right arrow key to configure these IPv6 settings:
Parameter Setting
DHCP Mode
Set to Disable DHCP.
IP Address
A unique IP address.
IP Subnet Mask
The subnet mask that matches the other devices
in your network.
IP Router
(Gateway)
If the IF30 will communicate with devices on
another subnet, enter the address of the router
that will forward frames.
Parameter Setting
Enable
Autoconfiguration
Enables automatic assignment of a unique
address to this IF30.
IPv6 Address
A unique 128-bit IPv6 address.
IPv6 Subnet Mask
The IPv6 subnet mask. Range is 1 to 128 bits.
IPv6 Router
(Gateway)
A unique 128-bit address for an IPv6 router.